OpenGeofiction
FORZA- Due to increased traffic on PR 8 along the Forza River proposals have been made to build a motorway along PR 8 to relieve traffic as well as give a safer route for traffic. The new motorway is planned to utilize the existing roadways of the entirety of the 8th street expressway, Owenton way, and Owenton parkway, it will bypass all places and will be mostly 2 lanes in each direction with it increases to 4 lanes in each direction inside the Forza beltway.
FORZA- The un-built southern portion of the Forza beltway has been a high-priority project for a long time, it has gained more support despite the enviremental concerns because it passes through forests. Supporters say that it will relieve traffic on MW 5 and MW 105 in the downtown area. Protesters say that it will destroy the Henderson forest and split the New Haven park in half.
WATERLOO- Proposals have been made to widen the Waterloo urban belt so that it is 3 lanes in each direction instead of it mostly being 2 lanes in each direction. It will relieve traffic on the heavily used urban belt.
DANVILLE- Danville has started construction on widening PR 88 from the Danville beltway to the southern end of the existing widening just north of the Martins Ferry bridge. It will improve safety, better connect Scottsville to motorways, as well as sucessfully meet future traffic estimates.
FORZA- The capital has approved the Service Expansion Program (SEP) which will establish more rest stops on Farax’s motorway system. It will also build more runaway truck ramps as well as better warn about road conditions. It will expand Farax’s EDI VMS system to better warn about conditions on roadways.
Stay tuned to WXFI News for more updates
Discussion
Comment from Logan230 on 9 May 2015 at 02:18
Just copy our road system without permission, that’s cool.
Comment from iBallasticwolf2 on 9 May 2015 at 11:31
I wasn’t trying to do that
Comment from Logan230 on 9 May 2015 at 14:26
It’s OK, I don’t really care.
Comment from iBallasticwolf2 on 9 May 2015 at 21:22
Please, tell me what aspect I was copying and where, I will fix it.
Comment from tom_m7 on 10 May 2015 at 20:37
@Logan230 OpenGeofiction gets nowhere with passive-aggressiveness. Cut it out, please.
@iBallasticwolf2 It’s probably your route prefixes - “PR” and “MW” are used in Drevet’s road system.
Comment from iBallasticwolf2 on 10 May 2015 at 21:09
@tom_m7, I see, the thing is that those prefixes are the stock prefixes so it shouldn’t be considered copying, also I plan to implement a new prefix for special routes entirely within future districts I will be sectioning. The new routes will be District routes (DR). However first I need to find out how to section my country off into districts and figure out how to label my country properly
Comment from tom_m7 on 10 May 2015 at 22:14
I agree with your logic about prefixes - those aren’t exactly stock, but, for example, Korea’s highway shields look almost like ripoffs of Interstate shields, but they’re not getting any repercussions, so you aren’t really copying Logan. I can help you a little bit with districts here - first draw Administrative Boundary ways where you want your state/district boundaries to be, add an “admin_level” = “4” tag to each way, and then follow the directions in this diary entry written by BelpheniaProject to “label” your country properly. If you use an editor program other than JOSM, the directions will be different.
Comment from iBallasticwolf2 on 10 May 2015 at 22:46
I am having a hard time understanding this, I followed the instructions except for “boundary boundary” which I do not know what is meant by that
Comment from wangi on 10 May 2015 at 23:29
@Logan230, @iBallasticwolf2 - you both seem to have motorways with medians hundreds of metres wide; and junctions likewise scaled up from reality. I know it’s hard to catch this editing on a blank canvas!